HYOSUNG Comet 250 FI, Owner'S Manual

Page: 27 / 78

26
⑧⑧
SELECT SWITCH
Use this switch to adjust the following :
●
In the normal mode
Push it for
0.6 ~ 1
seconds
Adjustment
To adjust the light of
speedometer display
(100%
→
75%
→
50%
→
25%
→
100%)
2 seconds
Normal mode
→ Clock reset mode
●
In the clock reset mode
Push it for
0.6 ~ 1
seconds
Adjustment
Increase the minutes of clock
2 seconds
Clock reset mode
→ Normal mode
⑨⑨
RESET SWITCH
Use this switch to adjust the following :
●
In the normal mode
Push it for
2 seconds
Adjustment
To reset the trip meter to
zero, while the display
indicates trip meter or
0.6 ~ 1
seconds
Odometer → Trip meter →
Trip meter → Odometer
●
In the clock reset mode
Push it for
0.6 ~ 1
seconds
Adjustment
Increase the hour of clock
A
B
A B
⑩⑩
SPEEDOMETER
The speedometer indicates the road
speed in kilometers or miles per hour.
⑪⑪
“FI”(Fuel Injection) CHECK LAMP
It comes on for about three seconds
whenever the ignition switch is set to
“ON” position with the engine stopped as a
test of injection system operation. The
check lamp must go off after three seconds.
If the lamp comes on during normal
engine operation, it means that the
fuel injection system is not operating
correctly. When this is the case, stop
the engine immediately and contact a
Hyosung authorised dealer.
CAUTION
GT250‡»` 2008.7.18 4:12 PM ˘ ` 26 JINSUN 300DPI 100LPI W