inspected by qualified personnel at regular
intervals in order to detect and resolve any
fatigue in material joints and screw connections
at an early stage.
ȫ
Tighten all screw connections to the specified
tightening torque (see manufacturer’s
specifications).
ȫ
Only the connecting hardware supplied by the
manufacturer is allowed to be used.
ȫ
The forces and loads specified by the
manufacturer must be observed. The product
is only allowed to be assembled by qualified
personnel.
ȫ
Screw connections must be properly checked
after assembly.
ȫ
Do not attach any large advertising signs or
other components that may increase the wind
load.
2.2.2 Users
ȫ
Read and follow all instructions concerning use
of the product.
ȫ
Do not carry out any activities that are only
intended for experts, qualified personnel, and
service technicians authorised by the operator.
ȫ
If there are no guardrails to prevent falls, the
product must always be used in conjunction
with the appropriate fall protection PPE.
2.2.3 General safety instructions
ȫ
Use the handrails when climbing up the stairs.
ȫ
The product may only be accessed via the
access point provided (e.g. stairs, ladder).
Climb up slowly and without rushing.
ȫ
Keep your eyes on the steps when descending
a staircase steeper than 45°.
ȫ
No-one is allowed to remain between the cross
and diagonal braces of the platform unless for
maintenance and repair purposes.
ȫ
Step on the product only when the brake unit is
engaged (applies to mobile products).
ȫ
When moving the product, make sure that
there is a clear path and always keep an eye on
it (applies to mobile products).
ȫ
Always regulate the travel speed to ensure the
product can be stopped at any time (applies to
mobile products).
ȫ
Always move mobile products in the
longitudinal or diagonal direction on a level,
unobstructed surface with sufficient load
capacity. Upon arrival at the desired location,
immediately secure them against rolling away.
ȫ
Never move mobile products if there are
persons, materials or tools on them.
ȫ
Always move mobile products by manual force.
Never use a tow vehicle or forklift for this
purpose. Avoid any impact with other objects.
ȫ
Do not climb onto the guardrails.
ȫ
Do not lean your body against the guardrails.
ȫ
Do not exceed the specified permissible loads.
ȫ
Do not try to increase the working height by
using ladders, boxes or other equipment.
ȫ
Always distribute loads evenly on the platform.
ȫ
Do not place any objects on the stairs.
ȫ
Do not generate lateral loads, e.g. by swaying
back and forth.
ȫ
Do not attach cranes, hoists or other similar
equipment to the product.
ȫ
Do not jump on the stepping surfaces.
ȫ
Slippery substances (oils, greases, etc.) as well
as ice and snow must be removed from the
stepping surfaces and guardrails before the
product is used.
3 OVERVIEW
3.1 Scope of delivery
The scope of delivery varies depending on the
order.
→ Before starting to assemble the product, check
whether all parts have been included and are in
perfect working order.
→ Use only original parts that are free from
defects when assembling the product.
→ If there are any missing, damaged or defective
parts, please contact the manufacturer or
dealer.
→ Observe the type plate.
3.2 Accessories
Some products have optional add-on parts or
accessories. They can be requested directly from
the manufacturer or dealer.
Original HYMER instructions for use | BA article no.: 21000001
11
