HygroMatik HeaterLine HL 12, Manual

Page: 8 / 70

Page 8
Warning: Make sure that no ignitable gas mixture can get into
the steam cylinder.
Accident Prevention Regulations
Comply with the accident prevention regulation
Accident Prevention Regulation Electrical Systems and Equip-
ment to prevent injury to yourself and others.
Operation of the Unit
Do not perform any work which compromises the safety of the
unit.
Regularly check that all safety and monitoring devices are func-
tioning normally.
Do not remove or disable safety devices.
Installation, Dismantling, Maintenance and Repair of the
Unit
Disconnect unit components from power supply prior to mainte-
nance or repair work.
Attaching or installing additional components is permitted only
with the written consent of the manufacturer.
Electrical
Installation in accordance with CEC and/or NEC!
Work on the electrical system must be performed by qualified
personnel.
Disconnect unit components from power supply prior to work
In case of a malfunction in the electrical power supply, switch off
the unit immediately.
Use only original fuses with the appropriate amperage rating.
Regularly check the unit's electrical equipment. Promptly repair
any damage, such as loose connections or burned wiring or
defective electrical insulation. After proper electrical installation
or repair, test all safety mechanisms (such as grounding resis-
tance).
HygroMatik steam humidifiers are IP20-protected. Make sure
that the unit is protected from drips in its installed location.
Installing a humidifier in a room without water discharge requires
safety devices to protect against water leakages.
2.3 Disposal after Dismantling
Note: The operator is responsible for the disposal of unit compo-
nents as required by law.