Page 15
Wall clearances
When mounting the steam humidifier, the
wall clearances shown in the fig. below must
be obeyed:
Mounting principle
For wall mounting drill measures, please
consult the table above (measure A and B).
In case of no suitable wall available for
mounting the unit, it is recommended that
installation is made on brackets firmly
anchored in the floor.
»
mark the holes for the upper sus-
pension brackets
screws
»
drill holes and dowel
»
screw in the supplied mounting
screws; let the screws protrude
approx. 12 mm
/
.5 inch from wall
»
ensure firm fixation and load-carry-
ing capacity of the mounted screws!
»
hook in the unit and ensure safe
suspension
»
mark the holes for the lower suspen-
sion brackets screws
»
remove the unit
»
drill holes and dowel
»
hook in the unit and mount the lower
screws firmly
To function properly, the steam humidifier
must hang level and plumb.
>500/19.7
>200/7.8
>300/11.8
>50/2.0
device rear
suspension
brackets
all measures in mm/inch
