8075A_B.docx
4
February 2017
POWER SWITCH
Turns monitor ON and OFF.
ALARM SWITCH
Enables local audible alarm when dew point
exceeds the alarm set point.
LINE CORD
Provides connection to power.
BEEPER (not
visible in picture)
Provides audible signal when the measured
dew point is above the alarm set point.
DEW POINT
CONDITION
INDICATORS
Green light is on when dry air is detected,
red light is on when measured dew point is
above the alarm set point.
LINE PRESSURE
GAUGE
Indicates actual air pressure at the sensor
housing inside the monitor.
SAMPLE HOSE
ASSEMBLY
Six feet of pressure resistant hose connects
monitor input port to compressed air test
location.
FILTER
Filter removes particulates from sample air.
HOSE STORAGE
CLIP
Secures sample hose when not in use.
QUICK CONNECT
1/4” industrial quick connect to install in
compressed air piping.
ANALOG OUT
4-20mA and 0-5V output for remote
monitoring or data logging. Mates with
standard 3 pin M8 female cable.
NOTE: The 8075A is shipped with a paper desiccant pack
which can be discarded when the unit is unpacked.
