10
Battery Insertion
8
Battery Insertion
The device works with 3 lithium batteries (button cells) called CR2032.
These have to be removed from the packaging and inserted into the battery
compartment of the device. Turn the battery cover with a smooth-edged
coin counter-clockwise until it stops.
Turn the device slightly down, so that the battery cover can be removed.
Place the 3 button cell batteries with correct polarity (
+ side up, see Fig.
) into
the tray one by one. Then place the battery cover on and press slightly with
a coin, turning clockwise until it stops.
Natural oils found on hands should not come in contact with batteries during
insertion. Contamination can lead to a more rapid discharge of the batteries.
Therefore, gloves or plastic tweezers are recommended.
In case the device does not start after putting in new batteries, please check
the polarity and clean the batteries by using a dry cloth.
After turning on the device for the first time or changing the
batteries, date and time need to be set. Please refer to chapter
Setting Date and Time
.
