OUTDOORS AND DAMP ENVIRONMENTS INSTALLATION
When installing the sounder outdoors or in a damp environment, carefully apply the self
-
adhesive
sealing pad to the back of the sounder base (picture 5).
WALL INSTALLATION
1)
Choose the installation location for the sounder based upon system design regulations.
2)
Fix the sounder base to the wall; the prepared location options for the fixing screws are highlighted in picture 6.
CABLE ENTRIES
The sounder base is provided with a knockout entry for the system cables, located in the centre of the base (picture 7).
The side wall of the base has prepared drilling points to allow for installation of cable glands; a row of three drilling points are provided to allow
for single or twin cable connection (picture 8).
TERMINAL BLOCK INSTALLATION
The terminal block on the back of the sounder body is installed as illustrated in picture 9.
L20
-
CWS1W
-
1400 (vA.5)
EN 54
-
3 Type B
-
approved for outdoor
use.
Picture 5
Picture 6
Picture 7
Picture 8
Picture 9
