WIRING
Connect the sounder to the sounder circuit from the control panel; wiring terminal connections are as illustrated in picture 10 and described in
table 1; an example of a typical circuit wiring arrangement is shown in picture 11.
Terminal block number
Terminal block designation
Notes
Usage
1
Pos
Terminal blocks for the line
’
s positive terminals
(+). These connections are shorted: either one
can be used.
Connect to the positive terminals of the
control panel
’
s sounder circuit.
2
3
Tone
Terminal blocks for the line
’
s negative terminals
(
-
). These connections are shorted: either one
can be used.
Connect to the negative terminals of
the control panel
’
s sounder circuit.
Wiring to these terminal blocks acti-
vates the main tone set.
4
5
Alt
Terminal blocks for the line
’
s negative terminals
(
-
). These connections are shorted: either one
can be used.
Connect to the negative terminals of
the control panel
’
s sounder circuit.
Wiring to these terminal blocks acti-
vates the alternate tone set.
6
Hyfire Wireless Fire Solutions Limited
-
Unit B12a, Holly Farm Business Park, Honiley,
Warwickshire, CV8 1NP
-
United Kingdom
www.hyfirewireless.com
Table 1
Sounder line (+)
Sounder line (
-
)
Picture 11
Use of the Tone or Alt terminals enable, respectively, the main tone set or the alternate one; refer to the MAIN TONE SET
and the ALTERNATE TONE SET paragraphs.
Picture 10
A
lt
T
o
n
e
P
o
s