HYENA E-BIKE SYSTEMS
6
Safety Instructions
Instructions Pertaining To A Risk Of Fire,
Electric Shock, Or Injury To Persons
•
WARNING
- When using the
Charger 2A
, basic
precautions should always be followed, including the
following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is
necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not use this product if the flexible power cord or
output cable is frayed, has broken insulation, or any other
signs of damage.
• All the component leads shall use original Hyena
components.
• This equipment is not intended to be used at ambient
temperatures less than 0°C (32°F) or above ambient
temperatures of 40°C(104°F).
• Do not immerse the product or any e-system component
in water. The penetration of water into the charger could
cause electric shock.
• Do not place the product or any e-system component
near fire or heat.
• Always turn off the e-bike system and remove the battery
before install, disassemble or modify any components on
the e-bike.
Important Notice
• This product manual is intended primarily for the trained
technician to install, disassemble, or maintain the e-bike.
• Users who are not professionally trained for bicycle
assembly should not attempt to install, disassemble or
modify the components themselves.
• All Hyena e-system manuals and technical documents
are accessible online at "www.hyena-ebike.com".
• The term “battery” is used in these instructions to mean
all original Hyena e-Bike batteries.
• Read and observe the safety warnings and directions
contained in all the Hyena e-Bike system operating
instructions and in the operating instructions of your e-
Bike.
Grounding Instructions
• The whole charging behavior must be keep grounded. If
it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded in accordance with
all local codes ordinances.
•
WARNING
- Improper connection of the equipment
grounding conductor is able to result in a risk of electric
shock. Check with a qualified electrician if you are in
doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product - if it will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
Moving and Storage Instructions
• When possible keep the product and all e-system
components in their original package and keep tools or
other metal objects away from them while storage and
moving.
• If you did not keep the original packaging, they can be
packed in strong cartons with proper packing materials
such as bubble wrap or soft cloth, and label the cartons
Fragile.
• Do not bundle the charger cables.
• Do not hold the battery charger by the cables when
carrying it.
• In order to prevent the cable from being damaged, avoid
wrapping it around the main body during storage.
• Do not store the product at ambient temperatures less
than -20°C (-4°F) or above ambient temperatures of 55°C
(131°F).
• Cover the product to prevent damage by sunlight if you
will be keeping it stored at any place for more than a
week.
• Store the product on a fireproof surface and without
contact water, heat, or sands.
• Do not place any heavy item on the product or any e-
system component.
• Do not place the product or any e-system component in
the car trunk for more than one day.
• Do not load or move the product in the rain whenever
possible, and make sure it has no moisture or mildew
before loading it.
• Do not drop the product from more than 30cm height.
• Periodically check the battery charger and adapter,
particularly the cord, plug, and case, for any damage. If
the battery charger or adapter is broken, do not use it until
it has been repaired by the place of purchase or a
distributor.
Maintenance
• When performing cleaning, disconnect the power plug
from the electrical outlet and the charging plug from the
battery. If this is not observed an electric shock may occur.
• Do not clean the product or any e-system component
with any detergent or organic solvent. Only clean the
product with a water-dampened soft cloth.
• Do not clean the product or any e-system component
with pressured water.
