Tube Set
Depending on the size of your pool, you will have been supplied with one of the following tube sets.
We recommend that your Pool Roller be slightly wider than your pool blanket. If your pool has a surround adjacent to
the pool coping, the crank handle requires a clearance of 100 mm.
Item HRA50180V Tube Set
Extendable up to 5800 mm
• Three (3) 1440 x 38 mm diameter extruded aluminium tubes
• Two (2) 1440 x 41 mm diameter extruded aluminium tubes
• One (1) overcover and fittings
Begin tube assembly with small tubing plug.
End tube assembly with small tubing plug.
Suitable for pools up to 10200 m long.
Item HRA50240V Tube Set
Extendable up to 7400 mm
• Three (3) 1670 x 38 mm diameter extruded aluminium tubes
• Two (2) 1670 x 41 mm diameter extruded aluminium tubes
• One (1) overcover and fittings
Begin tube assembly with small tubing plug.
End tube assembly with large tubing plug.
Suitable for pools up to 102000 m long.
Rubber bumper
Qty: 4
Axle with crank handle
Qty. 1
Barrel with handle
Qty. 2
Top bracket
Qty. 2
Plastic bolt / nut
Qty. 2
Lock pin
Qty. 2
Axle end
Qty. 1
Diagram 1
Preparation And Assembly
Check you have all the items and assemble as illustrated below:
Thank you for purchasing a Hydrotools Pool Roller (reel). Please follow the instructions carefully to protect your warranty
and enjoy years of hassle-free use
Please use your pool blanket and reel in the manner it was intended for:
• Your pool blanket is not a safety cover
• Remove the pool blanket and reel assembly from the pool completely before swimming.
• Do not store the pool blanket on the ground in direct sunlight, as it will shorten the life of the blanket and may
damage your lawn.
• Always cover your pool blanket with the overcover supplied, when it is stored on the reel.
Plastic grommet
Qty. 10
Phillips-head screw
driver bit Qty. 1
Stainless steel self-
drilling screws Qty. 20
EPDM domed washer
Qty. 10
Cord
Qty. 18000 mm
2
AG 200704 20/7/04 1:17 PM Page 2
