- 2 -
Operating Instruction HY-MAG
®
INTEGRAL
General
The HY-
MAG
Integral is a high-quality menu- and micro-processor driven control box
providing maximum efficiency for the HY-
MAG
Water Conditioning Units sizes DN20 to
DN100. The control box is pre-programmed ex works to the individual water conditioning
units.
The instructions render a survey on the menu guide and the individual programming
possibilities for the operator.
The specific technical data for the HY-
MAG
Water Conditioning Unit are shown on the type
plate. Below some information:
Mains voltage:
230V, 50cps a.c.
Protection class:
IP 65
Ambient temperature
Control box:
max. 40°C
Flow capacity water part:
dependent on nominal width
Max. operating temperature: 80°C
Nom. Pressure:
PN 16
CAUTION:
The HY-
MAG
Integral control box is designed in protection class IP65.
The feed line with power supply plug for mains supply does not meet the
requirements. Mains supply line and plugs must rather be positioned
outside the possible spray water range or be protected by appropriate
means.
NOTE:
The HY-
MAG
Integral control box is provided with a transparent
plastic glass. To be able to change or set control operations, the plastic
cover must be opened with the right-hand closure.
Once setting has been finished, the cover must be closed again with an
audible sound.
NOTE:
The water parts of the DN 100 have, contrary to the water parts series
DN25-DN65, an additional thermal protection to avoid overheating. The
units are supplied ex works with appropriate connections.