PRODUCT FEATURES
1.
GROUND FAULT CIRCUIT INTERRUPTER
– This device is required for portable tubs as specified in the
national electrical code article 680. The GFCI is designed to protect against potential electrical shock
hazard should a ground fault occur.
2.
THERMOSTAT
- The thermostat regulates the water temperature of your tub.
3.
TIMECLOCK (Optional):
Provides timer control over heating and filtering cycles
4.
PUMP RECEPTACLE
– Connect pump here.
5.
POWER AIR SWITCH
– Turns the system on and off
6.
SAFETY LIGHT CIRCUIT
– 120V hot output for 12V light circuit
7.
SANITIZER CIRCUIT
– Provides a 120V output when pump is running for a water sanitizer
8.
HIGH LIMIT
- A safety switch that will shut the heater off if the temperature within the heater reaches a
non-adjustable limit. Push to reset.
9.
SYSTEM INTERFACE MODULE RECEPTACLE
– Provides Auto-Fill and Auto-Drain function. Auto-Fill
Control (PT# 48-0042-K)
10.
REMOTE CONTROL RECEPTACLE:
Provide remote thermostat control over the system.
11.
HEATER ASSEMBLY
- Thermostatically controlled and equipped with a high-limit safety shut off.
12.
ROCKER SWITCH:
Determines operation of the time clock.
13.
PLUMBING HEADER ASSEMBLY
– Connects the pump to the heater
14.
PUMP ASSEMBLY
– Pumps water to and from the baptistery
15.
BASE
– ABS base for mounting equipment
Figure 1.0
85-0130 REV.10
5/11
5
Summary of Contents for BES6000-HC Series
