Hydropool HS4300, Owner'S Manual

Page: 18 / 40

18
HYDROPOOL SERENITY SERIES CONTROL SYSTEMS NORTH AMERICA/ EUROPE GECKO IN.YE3
INITIAL START - UP
Before applying voltage to power - up your hot tub,
it is very important that you understand the
sequence of events that occur when the system is
ac vated in order that the pump(s) can be primed
efficiently and damage to the system can be
avoided.
PROGRAM MENU
The program menu is accessible by holding down
the Light Key for 5 seconds. In the Program Menu
the following parameters can be set: clock, filter
or purge cycles, economy mode and temperature
units. While in the program menu, use the Up and
Down keys (Up/ Down Key) to adjust the
parameters and the Light key to jump to the next
parameter. The changes will be saved a er the
confirma on of the last parameter only. If there is
no ac on taken for 10 seconds, the system will
exit the program menu without saving any
changes.
SETTING THE CLOCK TIME
Enter the program menu by holding down the
Light Key for 5 seconds. The display will show the
current clock se ng with the hour flashing. Use
the arrow keys to adjust the hour. Press the Light
Key to adjust the minutes. Press the light key to
jump to the next parameter or to the end of the
parameters to save the me.
TEMPERATURE CONTROL
FUNCTIONALITY AND
ADJUSTMENT
A er you exit the programming mode your hot
tub will automa cally heat to the factory preset
default temperature of 38°C (100°F).
The temperature shown on the screen is the
current water temperature. Use the UP and
DOWN bu ons to set the desired temperature.
The set point icon will appear at the top of the
screen. A er 3 seconds without any change to the
set temperature value, the keypad will resume
the normal display.
STANDBY MODE
Pressing the JET key for 5 seconds will enable the
Standby Mode. This mode allows you to stop all
outputs including automa c func ons such as the
filter cycle, heat request and smart winter mode
for 30 minutes to perform quick spa maintenance.
When ac ve, the display will toggle between the
“OFF” message, the clock and water temperature .