Hydropath HydroFLOW i Series, Manual

Page: 8 / 12

• Assemble
all the other ferrites around the
pipe according to the mechanical
configuration specified for the unit.
• Loosely secure each ferrite with plastic
thumb screws and thumb nuts.
• Once the ferrite ring is complete, tighten all
wing nuts until hand tight.
•
Do not over tighten as ferrites are
fragile.
• In accordance with local code and
regulations, connect the junction box to the
electrical power supply (87V-240V AC).
• Energise the electrical power supply and
ensure that the Red and Green LED lights
on the unit are glowing brightly.
Thumb nut
WARNING
The system must be used as
specified. Failure to do so
will prevent correct operation
of device and may impair
safety.
!
DO NOT POWER UP UNIT UNTIL ALL
FERRITES SUPPLIED ARE CONNECTED.
Thumb screw
Junction
box
87
– 240V
electric
supply