Hydropath HydroFLOW i Series, Manual

Page: 4 / 12

Electrical
Remote Monitoring Facility
A volt-free normally-open contact closure is provided by the unit connection with a BMS
(Business Management System) computer, to monitor that the unit is operating correctly.
Connection to the BMS output is made via the junction box. A suitable 5 core approved
cable must be used in order to make connection to the mains input and the BMS output.
Electrical Connection
The user must connect the electrical supply to the junction box in accordance with the on-
site ruling safety legislation at the time of installation. The power supply must be isolated,
for example via an isolating switch or circuit breaker. This is the sole responsibility of the
user and the site safety officer must be consulted before installation is undertaken.
This equipment has no user serviceable parts. Return to supplier for servicing. If the
equipment is used in a manner not specified by these instructions, the protection provided
by the equipment may be impaired
Line spike inhibitor
Conditioner
unit
Connection
to unit
L
BMS Relay
Signal Wires S/W
Fuse
holders
N
Line spike inhibitor
User mains
and BMS
connection
User mains
and BMS
connection
Inner grommet
allows for
connection to
different cable
diameters
Fuse not working indicators