HYDROLAB HLP 10, User Manual

Page: 58 / 146

Step 6
The package contains an inox arm which is used to
hold the water collection tabls. The INOX arm should
be installed in a holder on the left side of the device.
Step 7
Connect the demi water tap with a proper demierali-
zer socket “TAP WATER” and install it in the inox arm.
Step 8
In case if the device has a microfiltration capsule, it
has an additional tap that should be connected to:
„I TYPE 3696” and then installed in the inox arm. At-
tach the capsule to the tap.
Step 9
Waste connection. Waste connector provided by the
manufacturer assumes that the pipe’s diameter is 50
mm. Make a 4-5 mm hole in the pipe. Place a rubber
gasket around the clamping ring and install it in the
waste pipe where the hole is located. Then connect
the clamp with the device in the socket “DRAIN”.
58