46
Rev. 07142020
Boat Fitment
Take care to clear shafts, through hull fittings, strakes, etc. The boat
’
s keel must NOT rest on a cross beam
and should clear the beam by at least
1”.
The boat
’
s
Center of Gravity (CG)
must be in the center of the lift
(unless AUX tanks are used) bow to stern and port to starboard. This evenly distributes the load over the
lift, allowing for maximum lift height and level operation.
The CG of the boat, when located with the transom at the end of the lift, should never be forward of the
center
(CG)
of the lift. If this occurs, another set of Main Tanks may be needed. If the AUX tank is complete-
ly behind the CG of the boat, moving the tank farther back amplifies the lifting effect of the rear. If you
need to move the AUX tank back farther than the end of the lift, verify that you have enough space availa-
ble between the outdrives and the tanks to avoid damage to either.
It is the responsibility of the End User to ensure that:
•
The lift is installed by a certified HydroHoist Installer
•
The lift is operated in a safe manner
•
Regular inspection is performed on the lift components
•
Customer has read and understands all safety and warning labels
•
Has been properly trained in the operation of the lift
No alterations or modifications may be made to HydroHoist equipment without the express
written consent of HydroHoist. Re
-
installation, adjusting the bunks, and/or adjusting the tank beam spac-
ing must be performed to the standards of HydroHoist. It is the obligation of the End User to inform all
equipment operators of the above conditions. Additional Owner Manuals and Safety Warning Decals are
available by request.
