7
www.hydrofarm.com
INSTRUCTION MANUAL
MAINTENANCE
1.
Clean the machine with a soft wet cloth.
2.
Pull out the louver on the front panel to
gain access to the filter.
3.
Remove the filter mesh out of the unit.
4.
Use a clean rag to absorb the surface dust
on the filter mesh. If the filter is extremely
dirty, use tap water to flush the filter. Fully
dry the filter before putting it back into the
air inlet fence. A clean filter will increase
the m
achine’s capacity.
MACHINE STORAGE
If you don’t use the unit for an extended period
of time, please store it per the following steps.
1.
Clean the filter mesh.
ATTENTION:
The evaporator inside the
machine has to be dried out before the unit
is packed to avoid component damage and
molds. Unplug the unit and place it in a dry
open area for a few days to dry it out.
TIP:
Another way to dry the unit is to set
the humidity point higher than the
ambient humidity to force the fan to
dry the evaporator for 30 minutes. The
dehumidifying function will not work and
the fan can accelerate the drying process.
2.
Collect the power cord, bunch it, and hang
it in the power cord pocket at the back of
unit.
3.
Store the unit in a clean, dry environment.
