4
www.hydrofarm.com
DRAINAGE INSTALLATION
Install the included drain pipe to the draining
nozzle on the machine and direct the pipe to
the desired area before operate the machine.
If in need to replace or extend the drainage
pipe, use ID Ø16mm, or 5/8in, piping.
WARNING:
Do not block the drainage hose.
The end of the drainage pipe should not be
higher than the outlet hole. If the drainage
pipe end is higher than the outlet hole, water
will not drain properly and could damage
components of the unit.
MACHINE SETUP AND
OPERATION
KEY FUNCTIONS
POWER
– Turns the unit on and off.
CONTINUOUS OPERATION
– When pressed,
the unit will operate continuously.
TIMER/MODE
– The unit has 5 modes:
Humidity, Current Time, Timed Operation On,
Timed Operation Off, and Exit. Every time you
press the Timer/Mode key it cycles to the next
mode.
“+” KEY
– When in the “
SET
” mode, every time
you press the “
+
” key, it will raise the humidity
by 1%. If you hold the key down, it will add
humidity more quickly. When in any of the time
modes, the “
+
” key adds hours. These keys are
used to set “
CURRENT
” time, “
TIMING ON
”,
and “
TIMING OFF
.”
“–“ KEY
– When in the “
SET
” mode, every time
you press the “
–
” key, it will lower the humidity
by 1%. If you hold the key down, it will lower
humidity more quickly. When in any of the
time modes, the “
–
” key adds minutes. These
keys are used to set “
CURRENT
” time, “
TIMING
ON
”, and “
TIMING OFF
.”
HUMIDITY AND TIMER SETUP
When the machine is powered on for the
first time there will be an audible buzz sound.
Please note that the machine has a default
setting for humidity.
1.
Press the
POWER
button to start the
machine. The screen will display “
Run
” and
“
Current
,” the present humidity.
Run
INSTRUCTION MANUAL
Drainage
Nozzle
Drainage Pipe
