HydroBikes EXPLORER I Assembly, Operation And Safety Instructions Download Page 4

4 | www.HydroBikes.com

SAFETY INFORMATION

• Read this manual completely before assembling and operating  

your EXPLORER

®

.

• Consult a competent medical authority prior to undertaking any exercise 

or fitness program that involves the use of the EXPLORER

®

.

• ALWAYS wear a U.S. Coast Guard approved personal flotation device 

(PFD) when riding on the EXPLORER

®

.

• The maximum load capacity of the EXPLORER

®

 I is 400 pounds; 600 

pounds for the EXPLORER

®

 II.

• Do not carry passengers on your EXPLORER

®

.

• Do not allow anyone to sit on the handlebars.

• Do not pedal the EXPLORER

®

 from a standing position.

• Avoid swimmers, swimming areas, and boat traffic.

• Know and follow the boating laws and regulations of the area in which 

you are using the EXPLORER

®

.

• Do not operate your EXPLORER

®

 after sunset or before dawn, unless 

your EXPLORER

®

 is equipped with lights. Please follow the laws 

regarding boating in the dark in the area in which you are using 
the EXPLORER

®

.

• Watch for underwater obstacles when operating the EXPLORER

®

 in 

shallow water.

• Ask about local conditions before using your EXPLORER

®

 in  

unfamiliar waters.

Summary of Contents for EXPLORER I

























Reviews: