do not allow exclusions or limitations on how long an
implied warranty lasts, so the above exclusions may
not apply to you. It is the buyer’s responsibility to
ensure installation and use of Hot2Go® products
conforms to local codes.
INTERNATIONAL
END
USERS:
Warranty
is
furnished by authorized Hot2Go dealers or distributors
only; and the warranty may vary depending on the
dealer or distributor and may be different from Hydro
Tek’s Hot2Go product warranty; please consult
distributor for details.
HOW TO OBTAIN WARRANTY SERVICE:
1. List washer model#______________________.
List serial #____________________ (on base plate of
machine near the motor/engine).
2. Contact your local service dealer and return the
Hot2Go washer or part within the warranty period
along with your sales receipt. To locate service, call
customer
service
at
Hydro
Tek
or
go
to:
www.hydrotek.us and enter your zip code.
3. You also have the option to obtain a return goods
authorization and ship the questionable part freight
prepaid directly to the manufacturer. The part will be
evaluated upon receipt. If found defective,
manufacturer will repair or replace part under the
conditions of warranty and return to you.
4. If the defective component is an engine or motor
made by another manufacturer, we, or your authorized
Hot2Go dealer, can help you obtain warranty service
through the specific manufacturer’s local authorized
service center.
5. If you are unable to resolve the warranty claim,
write to Hot2Go c/o Hydro Tek Systems, Inc. 2353
Almond Ave. Redlands, CA 92374 USA, Attn.:
Technical Services. Please enclose a copy of the
dated purchase receipt and explain the nature of the
defect.
ELECTRICAL PRECAUTIONS:
1.
Observe all State, Local, and National codes
for the installation of your electrically powered
washer.
2. For a grounded product rated 250 volts, single
phase, or less: This product is provided with a ground
fault circuit interrupter built into the power cord plug.
(8hp single phase excluded; order GFCI separately). If
replacement of the plug or cord is needed, use only
identical replacement parts.
3. GROUNDING INSTRUCTIONS:
Cord Connected, Grounded Products:
This product must be grounded
. If it should
malfunction, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. The product is equipped with a cord
having an equipment-grounding conductor. The plug
must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
DANGER
–
Improper connection of the equipment-
grounding conductor can result in electrocution
.
Check with a qualified electrician or service personnel
if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the
product, do not cut off the ground pin
– if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician. Do not use any type of adaptor with this
product.
4. To comply with the national electric code, this
pressure washer should only be connected to a
receptacle that is protected by a ground fault circuit
interrupter (GFCI).
5. EXTENSION CORDS: Use of extension cords is
not recommended.
6. NEVER operate an electrically powered washer
after it has tripped a breaker or a ground fault device
without having the reason for the trip determined by an
authorized service engineer or competent electrician.
7. Use only in a dry area. Do not handle electrical
cords and plugs when they are wet, when your hands
are wet, or when standing in water. Do not spray
high-pressure water on to the machine.
8. Disconnect power supply before making any
repairs or adjustments.
9. Transformer on burner is 20,000 volts. Disconnect
battery cable before servicing burner or engine on
12+volt systems.
FIRE PRECAUTIONS:
1. DO NOT use improper fuels or solvents in this
equipment, and only fill with the correct fluids when
the unit is in an OFF condition, main power is
disconnected, and engine and burner are cool.
2. If equipped with a diesel heated burner system, fill
the diesel burner fuel tank with #2 diesel fuel,
kerosene, or approved alternate fuel. NEVER use
gasoline. Do not confuse gasoline and diesel fuel
tanks.
3. NEVER operate this equipment in the presence of
flammable vapors, dust, gases, or other potentially
combustible materials.
Warning: FIRE OR EXPLOSION HAZARD CAN CAUSE
PROPERTY DAMAGE, SEVERE INJURY OR DEATH.
WARNING
THIS EQUIPMENT CAN BE HAZARDOUS TO THE OPERATORS
SAFETY AND ONLY AUTHORIZED PERSONNEL WHO HAVE
READ AND UNDERSTOOD THE OPERATION MANUAL SHOULD
BE PERMITTED TO OPERATE THIS UNIT. NEVER ALLOW
CHILDREN TO PLAY ON OR AROUND THIS EQUIPMENT.
WARRANTY
– SAFETY WARNINGS
3
