7
Wall Mounting
NOTE Ensure the wall anchors are suitable for the wall being mounted to.
1. Offer the product to the wall
in the chosen install location
and mark through the 4
mount points.
2. Drill 4 x holes in the marked
positions using a Ø8.0mm
drill bit.
3. Insert the 4 x wall anchors
into the drilled holes.
4. Secure the product onto the
wall using the 4 x screws and
washers, using a PZ2 driver.
2.3
Mechanical Installation
Figure 4: How to mount the unit to the wall
Push
Fitting
Using the clear, rinse tubing supplied with the EvoRinse, connect one
end (Inlet to Rinse Pump) to the reservoir outlet on the unit (into push
fitting).
Figure 5: Connecting detergent supply tubing