Possible Causes of Problems
One or more stations do not turn on.
1.
Programming is incorrect.
2.
Controller is in Off or DeLAy mode.
3.
Jack is not plugged in correctly.
4.
Debris is in solenoid.
5.
Batteries need replacing.
6.
Valve control stem is keeping valve off.
7.
The solenoid wire is broken.
8.
The solenoid is faulty.
Stations turn on when they are not supposed to.
1.
Water pressure is too high.
2.
More than one start time is programmed.
One station is stuck on and will not shut off.
1.
Valve is faulty.
2.
Particles of dirt or debris are stuck in valve
or solenoid.
3.
Valve diaphragm is faulty.
4.
Jack was unplugged while valve was watering.
All stations do not turn on.
1.
Controller is in Off or DeLAy mode.
2.
Lack of power due to depleted batteries or faulty
solar panel (optional).
3.
Programming is incorrect.
Controller will not power up.
1.
Batteries are installed incorrectly.
2.
Lack of power due to depleted batteries or faulty
solar panel (optional).
Stations continue to turn on and off when they are
not programmed to.
1.
More than one start time is programmed with
overlapping schedules.
2.
excessive pressure.
n
14
n
Section
6
:
TROUBLeSHOOTINg
08HYD005525 04000-24 rC.indd 14
11/16/07 3:43:11 PM
