Hydro-Pro + premium 10, Installation Instructions Manual

Page: 20 / 228

4. USAGE AND OPERATION
17
4.3 Parameter table
Check the water supply device and the release often. You should avoid the condition of no
water or air entering into system, as this will influence unit's performance and reliability.
You should clear the pool/spa filter regularly to avoid damage to the unit as a result of the
dirty of clogged filter.
The area around the unit should be dry, clean and well ventilated. Clean the side heating
exchanger regularly to maintain good heat exchange as conserve energy .
The operation pressure of the refrigerant system should only be serviced by a certified
technician .
Discharge all water in the water pump and water system ,so that freezing of the water in the
pump or water system does not occur. You should discharge the water at the bottom of
water pump if the unit will not be used for an extended period of time. You should check the
unit thoroughly and fill the system with water fully before using it for the first time after a
Check the power supply and cable connection often,.Should the unit begin to operate
abnormally, switch it off and contact the qualified technician.
5.1 Maintenance
27ºC
27ºC
27ºC
Meaning
Heating inlet target temp. Adjustable
Adjustable
Adjustable
Cooling inlet target temp.
Auto inlet target temp.
Remark Default