Hydro-Pro + premium 10, Installation Instructions Manual

Page: 14 / 228

4. USAGE AND OPERATION
11
4.2.3 T emperature setting
Press
or
Press
or to change the value
Press
to save value
setting
Cooling target temperature
MODE
SET
TEMP
IN
C
TEMP
OUT
MODE
SET
SET
TEMP
C
TEMP
OUT
MODE
SET
SET
TEMP
C
TEMP
OUT
MODE
SET
TEMP
IN
C
TEMP
OUT
MODE
SET
MODE
SET
4.2.4 Clock setting
In the main interface press twice, hours will start to flash and press to increase value
or press to decrease value and press to save setting
At the same time, minute start to flashing press to increase value or press to decrease
value and press to save setting.
Press can not save setting parameter and back to main interface.
Attention: If there is no operation for 5s system will remember parameter setting and back to
the main interface.
For example:
In the main interface press or and the current mode target-temperature flashes, then
press to increase the temp.value, or press to decrease it.
Press can save setting parameter and back to the main interface
Press can not save setting parameter but back to the main interface
Attention £ If there is no operation for 5s system would remember parameter setting and back
For example: