manualshive.com logo in svg

Hydro-Force OLYMPUS M3-200H, Operating Manual, Page: 13 / 42

Share
Download
Hydro-Force OLYMPUS M3-200H Operating Manual Download Page 13

 

13

 
4. Connection of Solution Hose: 

Connect the high pressure solution hose to the solution outlet (female quick connect on the front of the 
machine). Connect the other end of the hose to the male quick connect on the cleaning tool.  When you are 
ready to start cleaning, turn the solution pump switch to the ON position 

 
 
 
 
 
 
 
 
 
 
 
 
 
5. Connection of Vacuum Hoses: 

A 1-1/2” x 25’ Vacuum Hose is included with the M3-200H.  The 2” cuff on the 25’ vacuum hose is 
connected to the Vacuum Barb on the front of the machine. The other end with the 1-1/2” cuff is connected 
to the cleaning tool. 
 
When ready to begin cleaning, turn both vacuum switches to the ON position. While the M3-200H can be 
operated with only one vacuum for cleaning delicate fabrics, in most situations you will turn both vacuum 
switches ON. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Vacuum Hose 
1-1/2” x 25’ with 2” & 1-1/2” cuffs 

Connect the male end of the HP Solution Hose 
Assembly to the female solution outlet fitting on 
the machine. Connect the female end to the 
cleaning tool. 

HP Solution Hose Assembly – AH79D 
1/4” id X 25’ with M-F Quick Connects 

Summary of Contents for OLYMPUS M3-200H











































Reviews:

No comments