12
3. Connection of Solution Hose:
Connect the high pressure solution hose to the solution outlet (female quick connect on the front of the
machine). Connect the other end of the hose to the male quick connect on the cleaning tool. When you are
ready to start cleaning, turn the solution pump switch to the ON position The Flojet solution pump, standard
on the M100 is self priming and usually additional priming procedures are not required.
If the pump does not prime by itself, or if flow is low or unsteady, check the hose from the solution tank to
the pump (as well as the inline filter) for clogging, kinks, or restrictions. Clean or replace hose and/or filter
and repeat the priming procedure. Check the jets and filters on the wand or other tool for flow restrictions
that can affect priming.
If you are having trouble with the pump, refer to the trouble shooting guide or contact your distributor for
advice or assistance.
4. Connection of Vacuum Hoses:
A 1-1/2” x 25’ Vacuum Hose is included with the M100. The 2” cuff on the 25’ vacuum hose is connected
to the Vacuum Barb on the front of the machine. The other end with the 1-1/2” cuff is connected to the
cleaning tool.
When ready to begin cleaning, turn both vacuum switches to the ON position. While the M100 can be
operated with only one vacuum for cleaning delicate fabrics, in most situations you will turn both vacuum
switches ON.
Vacuum Hose
1-1/2” x 25’ with 2” & 1-1/2” cuffs
Connect the male end of the HP Solution Hose
Assembly to the female solution outlet fitting on
the machine. Connect the female end to the
cleaning tool.
HP Solution Hose Assembly – AH79D
1/4” id X 25’ with M-F Quick Connects
