background image

 

 

Page 5 

9.

 

Battery Back-up (Optional) 

Place the two batteries side-by-side above the Rail 
as shown, and secure them with a Cable Tie. 
 
Connect the short wire from the Red terminal of 
one battery to the Black terminal of the other.  
 
Connect the Red Wire to the other Red battery 
terminal, and the Black wire to the other Black 
battery terminal. 
 
Lead the wires through the access hole and refer to 
Section 5.  ‘Electrical Terminals and Connections

 

 

Manufacturer’s Warranty 

 

Hydro Doors and Gates (Pty) Ltd (Hydro) warrants the first purchaser of the digi.one

,

 that the product shall be free of any 

defects in materials and/or workmanship for a period of twelve months (one Year) from the verifiable date of purchase. Such 
verification shall  include  a valid proof  of purchase  by  the  first retail purchaser, which shall include,  if possible,  the  Serial 
number of the motor under warranty. Upon receipt of the product the first purchaser is under obligation to check the product 
for any visible defects. 

 

This warranty is applicable to the product if sold and installed in the Republic of South Africa. 

 

If  the  product  is  sold  and  installed  outside  the  Republic  of  South  Africa,  the  obligations  for  repairing  this  product  under 
warranty will be borne by the distributor of the product in the territory concerned. The terms and conditions of warranties in 
a territory outside the Republic of South Africa will be available from the distributor in that territory. 
 

CONDITIONS:  

The warranty shall constitute the sole remedy available under law to the first retail purchaser for any damages related to, or 
resulting from, a defective part and/or product. The warranty is strictly limited to the repair or replacement of the parts of 
this product, which are found to be defective.  
The warranty does not cover: 

 

non-defect  damage  caused  by  unreasonable  use  (including  use  not  in  complete  accordance  with  this  digi.one 
installation/owner’s manual) 

 

labour charges for removal or re-installation of a repaired or replaced unit 

 

transport costs incurred in getting the product to Hydro; Hydro will quote for in-situ warranty repairs if requested 

 

damage to the product caused by lightning, power surges or incorrect installation 

 

the product if used to automate more than one door at a time  

 

the product if installed outdoors, including carports 

 

The product if installed in excessive traffic applications, for example, apartment blocks or parking garages 

 

any unauthorized, non-Hydro modification to the product or the components thereof; any modification that may be required, 
must be authorized in writing 

 

consequential or incidental damage to property or person 

 

batteries installed in the operator, remote controls or wall console 

 

Hydro will repair, or at its option replace, any device, which is determined to be defective in materials and/or workmanship, 
at no cost to the owner for the repair and/or replacement part.  

 

Defective parts will be repaired or replaced with new or factory rebuilt parts at Hydro’s option.  

 

Warranty repairs shall be effected, provided the product is returned to Hydro at the owner’s expense. 

 

No representative or person is authorized to assume for Hydro Doors any other liability in connection with the sale of this 
product. 

 

For warranty service or shipping instructions, please contact Hydro Doors. 
All items must be sent to Hydro Doors for service at the owner’s expense. 
 
 

Contacts: 

Hydro Doors & Gates (Pty) Ltd 

Head Office:

PO Box 635 Florida 1710 

Dialling Code: +2711, Tel: 474 9060, Fax: 474 9067 
Website: www.hydrodoors.co.za 

Sales Branches: 

Johannesburg: Tel: 0861 22 3444 Fax: +27 11 474 9067 Email: 

[email protected]

 

East Rand:  Tel: +27 11 397 8448  Fax: +27 11 397 8480 Email:  

[email protected]

 

Pretoria:  Tel: +27 12 653 6399 Fax: +27 11 653 6464 Email: 

[email protected]

 

Nelspruit:  Tel: +27 13 753 2176 Fax: +27 13 752 2636 Email: 

[email protected]

 

Cape Town:  Tel: +27 21 933 5556  Fax: +27 21 933 5558 Email: 

[email protected]

 

Durban: Tel: +27 31 700 2110 Fax: +27 31 700 2111 Email: 

[email protected]

 

Port Elizabeth: Tel: +27 41 367 2874 Fax: +27 41 367 3164 Email: 

[email protected]

 

Batteries 

Rail 

Summary of Contents for Digi One







Reviews: