Page 1
1.
F
eatures
Microprocessor based control system
One button to open, close and stop
Bright LED courtesy light, with a 3 minute time-out
Easily adjustable operating force/obstacle sensing
Supports Safety Beams
Optional back-up battery
Auto-close feature
24V DC Motor
provides superior power to weight, giving quiet, smooth operation with soft starting and stopping
Protected against overload and over-heating
Reliable chain-drive
Sturdy steel Rail
LED Display – simplifies function programming
Security – is ensured by the use of code-hopping technology
Manual Over-ride – a simple release allows the door to be operated by hand
Options – Safety Beams, back-up battery, wall button and Auto-close
2.
Technical Specifications
3.
Contents of the box
Door Condition:
For successful automation, a door should be in good working condition, i.e. it should be possible to open and close easily with
one hand, be correctly sprung and run smoothly without sticking or binding. Torsion springs should be greased. Tracks should
be well secured with correct clearances and be clean and free of grime. Badly worn hinges, rollers and bushings should be
repaired or replaced. Remove all unnecessary ropes, brackets, levers, etc.
Caution!
Garage doors, door springs, cables, pulleys, brackets and hardware are under extreme force and can cause serious
personal injury.
Note!
Most complaints of unsatisfactory garage door operation can be traced to problems with the door itself. The
digi.one
is
not intended to correct any problems that are caused by an unbalanced or binding door. When operated manually, a properly
balanced door will remain stationary, at any point of its travel, while being supported entirely by its springs.
For optimum reliability and lifespan of your
digi.one
operator, have your garage door serviced regularly.
Power Input
10% 50~60Hz
Receiver Frequency
433.92MHz
Motor
24VDC
Decoding
Rolling Code
Working Temp
>-20C, <+50C
Courtesy Lamp
LED
Relative Humidity
< = 90%
Courtesy Lamp Time
3 minutes
Operating Force
1000N
Fuse
2,5A 250V
Rail
Carriage
Power Head
Tapered
Saddles
Motor Shaft
Connecting Arms
Anchor Bracket
Rectangular
Bracket
Cross
Member
Door Bracket
