Page 2
DriMaster Upholstery Tool
HydraMaster Corporation
1/25/00
When the
Solution Valve
is turned to the ON position, the water will form a sheet
across the
Solution Injector Bar
.
Be careful not to touch the Solution Injector Bar, it
may cause severe burns!
To Adjust the Vacuum Relief:
There may be situations in which you wish to reduce the vacuum power to the
head of the tool.
4. To adjust the
Vacuum Relief
; hold the tool with your left hand and with
your right hand, hold the hose where it connects to the tool. Gently pull
the hose away from tool while twisting the hose until the
Vacuum Relief
holes are exposed. Readjust the water flow as required.
5. Once the hot water has reached the tool you are ready to clean.
It may be necessary to periodically clean the inside of the tool, hose, and manifold.
Debris can build up over time, restricting the vacuum flow.
CAUTION
!
