HYDRA-PULL HP 500, Operation And Parts Manual

Page: 24 / 77

OPERATING THE SPREADER
24
Operation Manual
OPERATING THE SPREADER
PREOPERATING CHECKS
1. Be sure spreader does not contain any foreign objects
2. Check for correct hydraulic hookup. Raise endgate fully. Engage beaters, engage apron chain
3. Disengage apron chain, disengage beaters
4. Close endgate
LOADING THE SPREADER
CAUTION: Do not place rocks, timbers, or other
solid objects in the spreader. Objects of this nature
can damage the spreader and could also be thrown
great distances causing possible injury to anyone
standing in the vicinity.
Load front of spreader first, distributing load evenly.
When operating without an endgate, avoid loading manure against the beater.
PREPARE TO UNLOAD THE SPREADER
CAUTION: Help prevent personal injury. Be sure no one is near spreader and tractor before operating.
1. Start beater by engaging PTO slowly
at low engine rpm. Increase to “PTO RATED” speed.
NOTE: For best spreading results,
operate
tractor at “PTO RATED” speed.
WARNING: Do not operate apron chain without running
the beaters as this may damage the spreader