HYDRA-PULL HP 500, Operation And Parts Manual

Page: 19 / 77

ATTACHING THE SPREADER
19
Operation Manual
ATTACHING THE SPREADER
ATTACHING SPREADER
CAUTION: Help prevent personal injury caused by
unexpected movement of the machine. Engage
parking brake and/or place transmission in “PARK”,
shut off engine, and remove key before working around hitch.
1. Attach with a 1-1/2 in. pin and secure.
(Top clevis required)
IMPORTANT: Shorten safety chain to allow only
enough slack required for turning.
2. Lock safety hook onto chain.
ATTACHING DRIVELINE
IMPORTANT: Avoid causing damage to shielding,
DO NOT use bell on driveline to lift driveline into position.
1. Support driveline, cradling it in your hand.
2. Rotate driveline (C) or tractor PTO (B) to align splines.
3. Pull collar (C) rearward and push forward on bell (A)
to engage driveline yoke with tractor PTO (B).
4. Pull back on PTO driveline shielding to be sure driveline
is locked. DO NOT pull on collar, this will release latch.
CONNECTING AIR HOSES (AIR ASSIST BRAKES)
1. Connect red line to supply port.
2. Connect blue line to service/control port.
CONNECTING HOSES (HYDRAULIC BRAKES)
1. Connect pressure hoses to pressure ports
of hydraulic remote coupler.
2. Connect return hoses to return ports
of hydraulic remote coupler.
(Relief factory set 1000psi)