background image

HV Wall Cowl 

incorrect

correct, minimum height 5mm

Installation and Maintenance Instructions.

THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.

Owner / installer: 

The life of this apparatus and its efficiency will be increased if 

its use and maintenance is carried out in accordance with these instructions and 
current statutory requirements. The installation and initial adjustments should be 
carried out by a qualified and competent technician. Hydor Limited should be 
consulted before substituting or fitting parts from another manufacturer. It is the 
responsibility of the installer to verify that the installation is in accordance with all 
current statutory requirements and the owner is given the current User’s Manual.

Any modifications to the system or its installation, even the smallest 
modification, change or elimination of security components or pieces that 
influence the efficiency or loss of ventilation, will result in Hydor’s warranty 
being cancelled.

Please take note of the following symbols used within this document:

 Warning:

 Hazards associated with electric current and potentially dangerous voltages

 Important:

 Important information

Hydor’s policy is one of continual improvement and the right to change a specification at any time 
without notice is reserved. Whilst every care has been taken to ensure that the contents of this 
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect 
of such contents. 

Hydor cannot guarantee the operation of any equipment unless all documented instructions are 
complied with, without variation.  
 
Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks, 
trade names or company names referenced herein are the property of their respective owners. 

Summary of Contents for HVWC800









Reviews: