Fastening/mounting the filter housing
Fastening/mounting the filter housing
During installation, make sure that the direction of flow through the filter is
correct. The connections are marked with IN / OUT. Only install the filter when it
is in an upright position.
Mount the filter housing with the 3 Ø 12 mm bore holes in the mounting base.
Make sure that no stresses or vibrations are transmitted to the filter housing.
Use hoses or expansion joints if necessary.
Make sure there is enough clearance (A) to change the filter bag/element.
In order to make changing the filter element easier, install the unit near the filter
housing shut-off valves.
WBF 16 bar
en(us)
Page 24 / 64
MoWa WBF 16bar 4031149a en-us 2016-02-25.doc
2016-02-25
