Selecting operating modes
OFX
en(us)
Page 33 / 52
BeWa OFX 3796731 en-us 2014-03-31.doc
2014-03-31
3.
Place the pressure hose (4.1) in
the tank with the suction hose
(3.0).
Switch on the unit using the
operating switch (6.10) and
monitoring the suction behavior
by observing the transparent
suction hose (3.0).
5.
If the unit does not pump any
fluid after more than 5 minutes
of operation, switch off the unit.
Fill the motor pump assembly
with fluid via the suction hose.
Switch the unit on again.
9
3
6
12
max. 5 min
6.
Once the unit and the hoses are
filled and no more air is coming
out of the pressure hose (4.1),
turn off the unit using the
operating switch (6.10).
8.
Mount the pressure hose (4.1)
onto the high-pressure port of
the hydraulic system to be filled.
9.
Turn on the unit using the
operating switch (6.10).
