Hydac MFU-15E Operating And Maintenance Instructions Manual Download Page 95

Page: 95 / 120

HYDAC FILTER SYSTEMS GMBH

Performing Maintenance | 8

BeWa MFU-15E_S 4391552d en-us print

95 / 120

8.4.1 Removing/mounting the push-in protective screen

No tools are required.

Fig. 30:

Removing/mounting the push-in strainer

100

Suction hose with quick coupling

700

Quick coupling on the filter unit

701

Seal ring for quick coupling

710

Protective screen, 300 µm

For disassembly, proceed as follows:

Switch off the filter unit and remove the lance from the
container and/or close the shut-off device in order to
prevent any subsequent flow of the medium.

Disassemble the suction hose. For details, see

Remov-

ing/installing the quick coupling [

}

92]

Now remove the seal ring

(701)

and then the protective

screen

(710)

. In order to do this, insert your finger into

the opening and pull out the seal ring and then the pro-
tective screen with your finger.

Disassembly of the protective screen is complete.

Summary of Contents for MFU-15E

























































































































Search results

Summary of Contents for MFU-15E

Reviews:

Related manuals for MFU-15E

Brands by name

Popular brands

Hydac MFU-15E, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for MFU-15E

Reviews:

Related manuals for MFU-15E

Brands by name

Popular brands