FMMP
Technical specifications
Hydraulic connection of the FMM
HYDAC Filter Systems GmbH
en
Page 17 / 28
BeWa FMMP 3360764 en 2009-06-05.doc
2009-06-05
WARNING
Impermissible operating pressure
Bodily injury
►
The maximum operating pressure of 300 bar
may not be exceeded.
NOTICE
The minimum differential pressure is < 15 bar
If the minimum differential pressure is not given, measuring errors will occur.
►
Observe the minimum differential pressure of 15 bar
Note that the direction of flow has to be from bottom (IN) to top (OUT) during
installation. This prevents measurement errors resulting from trapped air in the
system.
The FMMP is supplied with two test points (type 1604) on the inlet (IN) and outlet
UT). Remove the test points to connect via the connector thread G1/4 according
ISO 228.
(O
to
Test point 1604
Connector thread: G1/4, ISO 228
