Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
EN 7.613.5/03.19
229
FluidAqua Mobil
FAM 25/45/60/75/95 Series
Description
The FluidAqua Mobil FAM
25/45/60/75/95 series operates
according to the principle of vacuum
dewatering to separate free and
dissolved water as well as free and
dissolved gases from hydraulic and
lubrication fluids.
By using HYDAC bypass
filter technology, with its high
contamination retention capacity
and separation performance, the
unit achieves a very high level of
cost effectiveness.
All units have an AquaSensor AS
1000 to continuously monitor the
water content and to control the
unit. A CS 1000 particle sensor
for simultaneous monitoring of the
solid particle contamination can be
integrated optionally.
To increase the dewatering capacity,
a heater can be integrated optionally
for highly viscous fluids or for low fluid
temperatures.
The Siemens S7 series
programmable logic controller (PLC)
used in combination with a Siemens
touch control panel guarantees simple
and reliable handling in numerous
local languages.
Advantages
Extremely low residual water levels,
gas levels and particle contamination
in the operating fluids make for:
z
Longer oil change intervals
z
Improved component service life
z
Greater machine availability
z
Reduction in the life cycle cost
(LCC)
Technical specifications
FAM 25
FAM 45
FAM 60
FAM 75
FAM 95
Flow rates at 50 Hz
≈ 25 l/min
≈ 45 l/min
≈ 60 l/min
≈ 75 l/min
≈ 95 l/min
Flow rates at 60 Hz
≈ 30 l/min
≈ 54 l/min
≈ 72 l/min
≈ 90 l/min
≈ 114 l/min
Permitted fluids**
Fluids compatible with NBR seals:
z
Mineral oils to DIN 51524
z
Gear oils to DIN 51517, 51524
Operating fluids compatible with FKM (FPM,Viton
®
) seals
z
Synthetic esters (HEES) DIN 51524/2
z
Vegetable oils (HETG, HTG)
z
HFD fluids (not for pure phosphate ester which require
EPDM seals).
Sealing material
see model code
Filter size of fine filter
OLF-10
2600
MRF 3/11/40
Filter elements of fine filter
xxx= Filtration rating
N10DMxxx
2600RxxxBN4HC/-KB (-V-KB)
N40FMxxx
Clogging indicator
VM 2 C.0
VM 2 C.0
VM 2 C.0
VM 2 C.0
VM 2 C.0
Pump type, vacuum pump
Rotary vane
vacuum pump
Rotary vane vacuum pump or
Water ring vacuum pump
Pump type, others
Gear pumps
Operating pressure
max. 6 bar
Permitted pressure at suction
port (without suction hose)
-0.2 to 1 bar
Permitted pressure at outlet
(without return hose) **
0 to 3.5 bar
Operation viscosity range**
15 ... 350 mm²/sec (without built-in heater)
15 ... 550 mm²/sec (with built-in heater)
Fluid temperature range **
10 ... 80°C
Ambient temperature **
10 ... 40°C
Storage temperature range **
10 to 50°C
Relative humidity (ambient) **
Max. 90%, non-condensing
Electrical
power consumption (50 Hz)*
Without heater
≈ 3.5 kW
≈ 4.5 kW
≈ 5.9 kW
≈ 7.5 kW
≈ 7.5 kW
With heater
≈ 10.5 kW
≈ 13.5 kW
≈ 19.5 kW
≈ 25.5 kW
≈ 25.5 kW
Heating output (optional)
≈ 6.75 kW
≈ 9 kW
≈ 13.5 kW
≈ 18 kW
≈ 18 kW
Protection class
IP 54
IP 55
IP 55
IP 55
IP 55
Length of electric cable / plug
10 m / CEE (depending on the nominal voltage, see model code)
Hoses, length
5 m (mobile FAMs only)
Material of hoses
see model code
Connection, inlet/outlet
see table "Connection summary"
Weight when empty
≈ 410 kg
≈ 430 kg
≈ 550 kg
≈ 590 kg
≈ 620 kg
Achievable
residual water content
< 100 ppm – hydraulic and heavy oils
< 50 ppm – turbine oils (ISO VG 32/46)
< 10 ppm – transformer oils ***
* Maximum specifications given, depends on equipment
** For other fluids, viscosities or temperature ranges, please contact us.
*** Units not suitable for "Online" and "Onload" operation (transformer in operation and connected to grid).
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]
Servicio de Att. al Cliente
+34 986 288118
