HYDAC FILTER SYSTEMS CMP 1321, Operating And Maintenance Instructions Manual

Page: 8 / 36

CMP Safety information
HYDAC FILTER SYSTEMS GMBH en(us) Page 8 / 36
BeWa CMP1321 3765034 en 2012-09-25.doc 2012-09-25
Safety information
These operating instructions contain the most important information for operating
the CMP in a proper, safe manner.
Obligations and liability
The basic prerequisite for the safe and proper handling and operation of the CMP is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the CMP.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed here are restricted to use of the CMP.
The CMP has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazards may be posed
to the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
Use the CSM:

solely for its designated use

only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:

improper use of the CMP or use deviating from its intended use

improper assembly, installation, commissioning, operation and maintenance of
the CMP

operating the CMP when the system equipment or systems are defective

modifications to the CMP made by the user or purchaser

improper monitoring of unit components that are subject to wear and tear

improperly performed repair work