EDS 4000 Explosion Proof / Flame Proof
Page 5 of 30
Status: 08/01/14
HYDAC ELECTRONIC GMBH
Mat. No.: 669837
4. Important mounting instructions for Conduit connection
Mechanical installation
The process installation of the transmitters may only be carried out utilizing the hex. 27mm
flats on the process connection side.
Electrical installation
The electrical installation of the transmitters may only be carried out utilizing the hex. 27mm
flats on the ½ NPT conduit (cable outlet).
Do not use for screwing into
the mechanical connection!
Do not use for fixing the
sensor during electrical
conduit installation!
