Hyd-Mech S20DSP, Use And Maintenance Manual

Page: 93 / 136

7--3 86 Adjustments
Pedal control setting (optional)
"
Press
"
to display the pedal control parameter, then press
Y
to set the pres-
ence (YES) or the absence (NO) of this optional.
NO
PEDAL START
Optional inverter presence settings
"
Press
"
to display the inverter parameter and then press
Y
to set the pres-
ence or absence of this optional device by selecting ”yes” or ”no”.
YES
INVERTER:
Blade speed proximity settings
"
Press
"
to display the band speed detection proximity parameter, then press
Y
to set the presence or the absence of this optional, choosing YES or NO.
NO
BLADE SPEED PROXY:
Minimal lubrication system settings
"
Press
"
to display the min. lubrication system parameter, then press
Y
to set
the presence or the absence of this optional, choosing YES or NO.
NO
MIN. LUBR.:
FCTI / FCTA digital output enabling setting
"
Press the
"
key to display the parameter enabling or disabling the outputs of
the positions FCTI (backward head limit switch) and FCTA (forward head
limit switch). Press the
Y
key to set YES or NO.
NO
FCTI/A OUTPUTS
Blade stop setting
"
Press the
"
key to display the blade stop parameter, then press
Y
to set the
value of this parameter.
If the value is set as 2, the blade never stops;
if it is set as 1, the blade stops in the FCTI (backward head limit switch)
point;