Hyco Sapphire SAP02HC, Product Instruction Manual

Page: 7 / 12

4. Turn on water supply to the unit and check all connections
(including the installation kit) for leaks.
5. BEFORE switching power onto the unit hold down the hot water lock button
whilst operating the hot water tap until water flows.
Ensure that water has flowed from the hot water faucet before plugging
and switching the appliance on to heat. If the dispenser is turned on with
an empty tank it can be damaged.
Electrical
• Only connect the unit to a single phase supply as specified on the rating plate
• The unit should be installed with easy access to the electrical plug
7
ON
OFF
ON
OFF
2. Turn on the hot and cold
switch as required
1. Plug the unit in
2
the door and press it down
1
switch as required
1
2
1
the door and press it down
1
1
2