Hyco Sapphire SAP02HC, Product Instruction Manual

Page: 2 / 12

2
Thank you for purchasing the SAP02HC from our Sapphire range of
chilled water products. The SAP02HC provides instant high quality
chilled water together with filtered hot water for tea and coffee making.
Please read and follow these instructions carefully to ensure that
installation and operation is simple and safe.
1. Important safety points
•
Only connect the unit to a single phase supply as specified on the rating plate
•
Do not carry the appliance by the supply cord
• The supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service
agent for replacement
• The unit should be installed with easy access to the electrical plug
• Ensure that water has flowed from the hot water faucet before plugging and
switching the appliance on to heat. If the dispenser is turned on with an empty
tank it can be damaged
•
This appliance should be installed indoors, on a flat surface no less than 15cm
from the back wall
•
Install the appliance in a dry, well ventilated area; keep the ventilation openings
at the back of the unit uncovered and unobstructed
• Do not damage the refrigerant circuit
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision