3
2. Installation
Always ensure the castors are mounted to the bottom of the heater.
DO NOT TURN ON THE HEATER IF IT IS UPSIDE DOWN
•
Remove all the packaging.
•
Turn the heater upside down.
•
Position the wheel mounting plates between the end two fins at both ends of
the heater, attach them using the U-bolt and wing nuts provided.
•
Attach the castors to the plates using the nuts provided.
•
Ensure all nuts are tightened and then return the heater to the correct way up.
•
Allow the oil to return to the bottom of the unit before turning on, around two
minutes should be sufficient.
Riviera_Layout 1 31/05/2015 19:13 Page 3
