•
When the water has reached operating temperature the commissioning
phase ends and the unit switches to normal operating mode. This is indicated
by the status ring changing from red to green.
3. Operation
Status ring and caution indicators
•
The caution symbol will always be illuminated when power is supplied to the unit.
•
The status ring will show GREEN to indicate when the unit is ready to use (boiling),
or RED whilst heating to temperature.
•
If the status ring flashes this indicates the unit has encountered a fault
(see faults below).
Dispensing water
•
The flow of water is controlled by rotating the knob in the centre of the status ring,
Anti clockwise to increase and clockwise to decrease/stop the flow of boiling water.
•
The water is dispensed from the grey nozzle at the base of the unit.
Faults - The status ring can display two severities of fault.
•
Flashing green indicates the unit has shut down because it has encountered a
temporary fault. For example the dispensing knob was left open while unattended
or the water supply had been interrupted. After the fault has been fixed, power
off and back on again to reset the unit. It may be necessary to let the unit cool for
up to 10 minutes if the fault mode will not reset.
•
Flashing red indicates a permanent fault and the unit will need to be repaired
or replaced.
Omega.qxp_Layout 1 08/03/2017 13:23 Page 8
