15/16
IMM - UTILIGHT SGN LED - ST_AT_CT - PL_EN V01
Removal of exit sign plate:
a. In the case of recessed mounting, remove the luminaire from
the ceiling, then unscrew the masking frame from the luminaire
(see item 13).
b. Remove screws as shown on the drawing.
c. Using a 1.5mm hex key release the pictogram plate (make no more
than two turns).
d. Pull out the plate. Make sure not to lose the mounting pins
(two additional supplied with luminaire).
3
3
2
1
13. For recessed mounting:
a. Place the label supplied with the luminaire to the outside of the
masking frame.
2
1
30x15
40x20
20x10
b. Screw the masking frame to the luminaire according to figure.
Pay special attention to not cover the LED indicators
.
2
1
c. Bend the springs fixing the luminaire upwards and slide
the luminaire into previously prepared mounting hole in the ceiling.
2
1
30x15
40x20
20x10
14. Perform the commissioning procedure.
