6/8
www.hybryd.eu
SAFETY
• During the installation and usage of emergency luminaires, follow the national safety rules as well as generally accepted technical rules.
• Supply voltage should never be removed from the permanent phase by any external switches, relays or contactors (BMS, wall switch, etc.).
• During usage of emergency luminaires keep a register of inspection reports. Luminaire installation or maintenance has to be preceded by turning off
the power supply and battery.
• Ensure that all foreign bodies are removed before the luminaire power is switched on.
• The luminaire is to be used undamaged and in accordance with specifications.
• The luminaire is designed for use inside the building.
The above-mentioned luminaire is a fire protection equipment and therefore falls within relevant standards and regulations.
NOT OBEYING THE SAFETY INSTRUCTIONS
AND RECOMMENDATIONS CAN CAUSE LIFE
THREAT OR EVEN DEATH
Not obeying this instruction manual can result
in luminaire damage and loss of warranty
DO NOT STARE AT THE OPERATING LIGHT SOURCE
The luminaire should be positioned so that
prolonged staring into the luminaire at
a distance closed than 0.5m is not expected
DIMENSIONS (mm)
10
4
75,
5
96
IP20
IP65
1,
5
130
13
0
Ø80
120
120
110
Ø80
10
4
75,
5
96
IP20
IP65
1,
5
130
13
0
Ø80
120
120
110
Ø80
16 16
61
16
21
88
4,2
34
15
78
16
CONSTRUCTION
SM/N
Battery connector
Power connector
Fixing
springs
Communication
connector
Cable
holders
CT
AT
Power connector
WIRING DIAGRAM
SM
L
N
PE
1
KWADRA SU LED
1 2 2
PE
N
PE
N
1
KWADRA SU LED
1 2 2
PE
N
PE
N
NM
L
N
PE
N
KWADRA SU LED
N
PE
L
PE
L
N
KWADRA SU LED
N
PE
L
PE
L
BEFORE ANY INSTALLATION OR MAINTENANCE OPERATION IS PERFORMED
ON THE LUMINAIRE THE POWER SUPPLY SHOULD BE DISCONNECTED.
All installation and maintenance procedures can be performed only by qualified,
properly trained and if appropriate, certified staff.
