background image

PAGE  8

PRODUCT WARRANTY INSTRUCTIONS

The warranty card and purchase invoice is required as Hybrid / distributors will require 
documentary evidence when a warranty service is needed. Please keep your warranty  
card in good condition. 

Instructions:

  Warranty period: maintenance free for one year (The warranty is valid from the  

  date of purchase.)

  If the product does not use Hybrid liquid, the warranty period will be shorten  

  to three months. The cost of replacing spare parts will be the responsability  
  of the user.

 

The warranty is void when:

  The device has been misused or incorrectly managed, e.g. blow fuses caused by  

  overload or the excess of voltage

  The device has been damaged due to the transportation of it.

  The machine is faulty due to poor use, e.g. moisture, unstable voltage etc.

  The product has been altered by anyone other than a qualified Hybrid technician.

 

Exclusions:

 Packaging, casing and bracket of the product and battery inside  

  wireless remote controller.

  Hybrid will not charge for the maintenance and spare parts of the product,  

  provided that it has remained within the guidelines of the user manual, as well as  
  with the terms of the warranty. In regard to the products which exceed their  
  warranty period, Hybrid will only charge for the cost of the spare parts accordingly. 

  Hybrid reserves the right of final explanation for the content of the warranty card.  

  If there is anything unclear, please contact the dealer. 

Summary of Contents for HH3000













Reviews: