Hybrid HH3000, User Manual

Page: 4 / 12

PAGE 2
NOTES BEFORE USE
1.
Place the Haze machine horizontally, and check whether it is damaged or not. If damaged
please contact the supplier at once. Unscrew the lid of the oil tank and pour in the Hybrid
Haze liquid, and then fasten the lid.
2.
Before putting the power on, please verify that the power supply adheres to the rated
voltage of the Haze machine. The power supply should be connected to the ground socket.
When power is on, the indicator light will turn on, and the Haze machine will begin to work.
Connect the machine to the different controllers for different functions.
3.
Initially, it is normal for the Haze machine to create some Haze or steam.
4.
Place the Haze machine in a ventilated area, one may run the risk of the temperature fuse
over-heating and bursting, if kept in a confined area.
5.
Place the Haze machine on the ground in a horizontally position. The Haze machine
should keep a minimum of 50cm radius away from people. Keep away from children, fire,
as well as flammables and explosive materials. Keep nozzle within a 40cm radius to
prevent scalding.
6.
Continue adding liquid to avoid damage to the Haze machine’s pump and heater.
Turn off the power before adding liquid as overflowing may cause a short-circuit.
7.
In the event of:
haze finishing
there is noise from pump
or the machine stops producing haze, please disconnect the power at once, and
check the liquid deposit, fuse, cable and power plug. If the problem is still not solved,
please contact the supplier.
8.
Keep away from children. Do not add flammables such as oils or gas. Do not touch the wire
when the machine is running.
9.
Moisture may collect around the nozzle of the machine. There may be some excess liquid
emitted from any Haze machine during activity or after shut down.
10.
Please make sure there is no liquid and metals inside machine before turning on the
power each time. Do not modify or repair the machine by yourself.
If there is any problem, please contact the supplier.