4A
LED:
⑤
Signal indicator light of DMX
If the DMX signal was detected , the indicator light flashing.
⑥
Signal indicator light of slave
If the slave signal was detected , the indicator light flashing.
⑦
Signal indicator light of master
If the program in auto or sound mode, the indicator light is turned on.
⑧
Signal indicator light of sound
If the signal of sound was detected , the indicator light was turned on.
Note:
(1) In about 10 seconds, if no buttons was pressed, the LED display will be off.
Press any button to turn the display on again.
(2)After pressing a button, all the parameters will be saved after about 2 seconds .
(3)No matter what the program in which mode, once to detect the DMX or SLAVE
signal, the program will jump into DMX or SLAVE mode automatically. Then, if
DMX/SLAVE signal was disconnect, the program will return to the original mode.
4.2 Main Function Chart
5. How to control the fixture
There are two ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
C. IR remote control
